Phone: +61 (0) 7 3889 9949Email: sales@monarchindustrial.com.au

Oxford Cast Iron Simplex Basket Strainer

Eaton Model 72 Cast Iron Basket Strainer

Model:

Model 72

Application:

Liquid Filtration

Colour:

Blue

Media:

Stainless Baskets

Brochure and Datasheet Downloads

Eaton Model 72 Simplex Basket Strainers in Cast Iron are made for general industrial strainer applications and are available in a large variety of connection sizes and strainer basket removal sizes.

Simplex Basket Strainers are designed for applications where temporary interruption of a batch process can be permitted for basket cleaning.

Monarch Strainer are supported by our General Engineering and Strainer Basket Manufacturing Workshop in Brisbane.

Specifications
Sizing Chart

Material:

Cast Iron

Seals:

Buna-N/Nitrile (Standard), other materials available on request

Basket:

1 off Basket in Stainless Steel

Pressure:

125#

Lid Yoke Assembly:

Zinc Plated and Cast Iron

Options:

Differential Pressure Indicator
Magnets

Connections:

ANSI 125#, NPT and BSP

Flange Sizes:

1", 1-1/2", 2", 2-1/2", 3", 4",5", 6", 8"

NPT Threaded Sizes:

3/8", 1/2", 3/4", 1", 1-1/2", 2", 2-1/2", 3"

Basket Options

Perforated (Imperial)

1/32", 3/64", 1/16", 1/8", 5/32", 3/16", 1/4", 3/8", 1/2"

Perforated (mm)

0.5, 0.8, 1, 1.5, 2, 3, 4, 5, 6, 8, 10, 12, 15mm

Fine Mesh (Mesh Sizes)

20, 40, 60, 80, 100, 150, 200, 325, 400 Mesh

Fine Mesh (Micron Sizes µ)

80, 100, 130, 150, 190, 210, 260, 310, 401, 530, 570, 600, 810, 900 Micron

Hollander Weave (Micron Sizes µ)

5/14, 10/18, 15/26, 25/38, 35/45, 55/75

(5 = Micron Nominal / 14 = Micron Absolute)

One of the most important design considerations when purchasing a strainer is specifying the perforation or mesh size of the straining element. If the removal size required is not listed, please contact our sales team.

Factors to be Taken Account of when Selecting a Strainer:

Fluid type
Flow rate
Viscosity
Temperature – operating and design
Pressure – operating and design
Degree of filtration required
Connection type i.e. flanged PN16, ASA150, screwed BSP, NPT
Any special requirements i.e. heating jacket, magnets, mounting brackets, dp indicator/switch etc.

For most applications the clean differential pressure should be less than 0.2 bar (3 psi).
The chart is for water (1cSt) flowing through a filter with an element coarser than 1mm perforations.
Please refer to brochure for viscosity and mesh basket correction factors.

"Liquid Filtration Equipment, Bag Filters, Filter Bags and Manufacturing Strainer Screens for Australia, Pacific and South East Asia for over 25 years"

Monarch Asia Pacific Pty Ltd
Trading as Monarch Industrial Products
ABN 60 141 555 688
Unit 3, 8 Bult Drive, Brendale, QLD 4500
AUSTRALIA
Phone: +61 (0) 7 3889 9949

Alternate Site: www.monarchasiapacific.com.au

Menu

Eaton Model 72 Cast Iron Basket Strainer

Brochure and Datasheet Downloads

Basket Options