Monarch Industrial Products Filters and Strainers

Gas Liquid Separator Drain Traps

Air/Gas Liquid Separation
ASME, In accordance to ISO 9001 Quality Management System

Eaton Float Drain Traps, formerly Wright Austin, are available in a variety of models and materials of construction, featuring the Model 90-AC, Model 95-AC, Model 230-AC and Model 350-AC.

Eaton's float drain traps are the perfect solution to removing condensate removed from air or gas lines without loss of line pressure

Model 90-AC & Model 95-AC Float Drain Trap
Available in cast iron or cast stainless steel for 0 to 500 psi service. Loss of air or gas is prevented by a positive water seal. They have a straight-through design. Internal parts, including valve and seat, are corrosion-resistant, non-magnetic stainless steel. All working parts are attached to the base for easy removal and inspection. A side inlet/outlet configuration is available for iron, carbon steel and stainless steel traps.
Model 230-AC Float Drain Trap
Model 230-AC Available in cast iron for 0 to 125 psi service. Ideal for use where gummy emulsions or cylinder lubricants make other traps inoperative. They feature a vertical inlet, down-flow discharge design. Ample float power and large outward-opening discharge valve prevent loss of pressure. Internal parts are stainless steel, including non-magnetic valve and seat. Working parts are attached to the cover for easy removal without disconnecting the trap from the line. No priming is required. For low temperature applications a heater is available as an option.
Model 350-AC

Model 350-AC “THREE TRAPS IN ONE” is the basic principle of these ball float traps. Three valves open and close progressively as condensate volume varies. As float chamber water level rises, the float lies deep in the water until its buoyancy overcomes the opposing line pressure and snaps the valve wide open. When closing, as each valve approaches its seat, the line pressure snaps it tightly closed. These traps have cast iron bodies and stainless or copper internal parts. A by-pass thermostat is standard.

  • No priming required
  • Stainless steel internal parts are corrosion-resistant
  • Internal parts attached to cover for easy removal and inspection
  • No loss of line pressure
  • Choice of inlet/outlet configurations
  • Heater for low temperature applications
To assist us in providing a quotation or recommendation, please provide as much detail of your application as possible.
Application Complete and Return Form
Monarch General Engineering and Machine Shop Services Brendale Brisbane Queensland

Monarch Asia Pacific Pty Ltd, Copyright © 2021 All Rights Reserved
Release: 21:1:1