Monarch Industrial Products Filters and Strainers

Coalescers Separators

Air/Gas Liquid Separation
ASME, In accordance to ISO 9001 Quality Management System

The unique two-stage design of these Series CLC Coalescers/Separators allows them to remove 99% of all liquid and solid particles larger than 4 microns in size. Standard, one-stage separators are only capable of removing particles larger than 10 microns in size. The efficiency of Eaton’s Coalescer/Separator far exceeds that of any other type of centrifugal, cyclone, turbine or vane type separator. And it works with no moving parts to fail or wear out.

Easy Maintenance
The only maintenance required is the inspection, cleaning, or replacement of the de-misting pad. This is easily accomplished through either a quick-opening body closure or body flanges.

Two-Stage Design

First stage: the coalescer stage, the smaller fluid droplets enter a special wire mesh de-misting pad in the vessel. The purpose of this pad is to increase the size of the droplets as they pass through it so that they can be removed. The larger liquid droplets exit the demisting pad and enter the second separation stage.

Second stage: the droplets are centrifugally thrown to the outside wall by Eaton's unique CENPELLAR™ air flow element and flow to the bottom of the vessel for draining. The Vortex Containment Plate (VCP), exclusive to Eaton separators, prevents the droplets from being re-entrained after separation.

  • Compressed refrigeration gases
  • Evaporator overhead steam
  • Compressed air prior to desiccant dryer beds
  • High pressure gas at injection wells
  • Fuel gas lines to engines in power and industrial plants
  • Natural gas and gas distribution lines or regulator stations
  • Two-stage design removes up to 99% of entrained liquid or solid particles larger than 4 microns as compared to one-stage coalescers capable of removing up to 10 microns
  • Compact design
  • Easy maintenance
  • Three flow configurations
  • High Efficiency Over Wide Flow Range
  • ASME code stamp
To assist us in providing a quotation or recommendation, please provide as much detail of your application as possible.
Application Complete and Return Form
Monarch General Engineering and Machine Shop Services Brendale Brisbane Queensland

Monarch Asia Pacific Pty Ltd, Copyright © 2021 All Rights Reserved
Release: 21:1:1