Replacement Internormen Hydraulic Filter Elements

Internormen (Eaton) hydraulic filtration product line features more than 4,000 high-quality filter elements with a high dirt-holding capacity to ensure consistent filter efficiency and long element life. These elements are available with various filter materials, different construction types and micron ratings to help protect critical system components.

Internormen (eaton) genuine replacement filter elements with highest dirt-holding capacities ensuring consistent filter efficiency, even at high pressure differences. Various filter materials, construction types and micron ratings.

Search our Database using Hydraulic Element Codes »
Search our Database using Clogging Indicator Codes »

Features
Order Code
Downloads

Microglass (VG)

Deep filtration
Absolute Filtration
High particle holding capacity
Best micron rating at high Δp
Usable for mineral oils, emulsions and for most synthetic hydraulic fluids and lubrication oils
Various grades of filter fineness available (1 VG, 3 VG, 6 VG, 10 VG, 16 VG and 25 VG), other grades of filter fineness on request
Special filter design for lubrication applications available (10 API and 25 API)

Paper (P)

Deep Filtration
Nominal Filtration
Constructed of paper and polyester fiber
High material stability and strength
Available in 10 μm

Stainless steel wire mesh (G)

Surface Filtration
Nominal Filtration
Provides high resistance filter elements (irrespective of the hydraulic fluid used)
Partially cleanable
Available in 25 μm, 40 μm and 80 μm, other micron ratings on request

ISO Standards:

In addition to proprietary tests developed by Eaton, filter elements are tested according to several ISO Standards:

ISO 2941 Verification of collapse/burst pressure rating
ISO 2942 Verification of fabrication integrity
ISO 2943 Verification of material compatibility with fluids
ISO 3723 Method for end load test
ISO 3724 Determination of resistance to flow fatigue using particulate contaminant
ISO 3968 Evaluation of pressure drop versus flow characteristics
ISO 16889 Multi-pass method for evaluating filtration performance

Re-order Code

Each replaceable filter element is stamped with a 6 digit part number. This example cross references part numbers with their Type Code, an alphanumeric description code which describes the characteristics of the filter element.

Code Example

Part Number	Type Code
319965	01.E 240.3VG.30.E.P.-

Code	Description
01E	= Series 01E, Return Line
240	= Nominal Length 240(mm)
3VG	= 5 μm, Glass Fibre
30	= 30 bar Δp
E	= without by-pass valve
P	= Nitrile Seal
-	= Standard Spec

Brochure and Datasheet Downloads

Reference Chart

Exchange Filter Elements for all housings

High efficiency filter elements

Monarch General Engineering and Machine Shop Services Brendale Brisbane Queensland

Monarch Asia Pacific Pty Ltd
ABN 60 141 555 688
Unit 3, 8 Bult Drive, Brendale, QLD 4500
P.O. Box 4511, Brendale, QLD 4500
AUSTRALIA
Phone: +61 (0) 7 3889 9949
Mirror: www.monarchasiapacific.com.au

"Liquid Filtration Equipment, Bag Filters, Filter Bags and Manufacturing Strainer Screens for Australia, Pacific and South East Asia for over 25 years"